|
Home > Products> Protocol Converters> MCU2 Accessories
|
 |
|
 |
|
|
 |
|
| NRZ Cables |
|
|
|
| |
NRZ Micro-DB25F to DB25F Cable
|
Extends one CV-MCU2 Converter Module NRZ interface from a micro-DB-25F to a standard sub-miniature DB25F.
|
Six foot Length:
P/N 75011130
Twelve foot Length:
P/N 75011148 |
|
|
|
| |
NRZ Micro-DB25F to DB25M Cable
|
Expands the CV-MCU2 Converter Module NRZ interface (micro DB-25F) to a standard subminiature DB25M. Available in 6,8, 10, 12, 14 and 16 foot lengths - specify length when ordering.
|
P/N 75011154 |
|
|
|
| CDI Cables |
|
|
|
| |
Pigtail to Micro-DB-9 Cable
 |
Extends one CV-MCU2 Converter Module's unbalanced and balanced micro-DB-9M CDI interface to bare wire ends to be terminated as desired. Both balanced and unbalanced cabling is impedance matched.
|
Six foot length;
P/N 75011129
Twelve foot length:
75011149 |
|
|
|
| |
Micro-DB-9 to Triax Cable 
|
Expands converter module's balanced and unbalanced CDI interface (micro-DB9M) to a Triax sub-miniature cable plug (Trompeter PL155-32). Cabling is impedance matched. 12' length standard. Also available in 6, 8, 16, and 30 foot lengths - specify when ordering.
|
P/N 75011138 |
|
|
| UG-1837 cables |
|
|
|
| |
Pigtail to UG-1837 Cable |
Provides CX-11230 with Tx and Rx impedance-matched cable pair pigtails to bare wire ends to be terminated as desired. Pairs with CV-MCU2 CDI Pigtail cable to route balanced signals through a patch panel. 20kA lightning protection for CDI interface is included. Eight foot length.
|
Six foot length:
P/N 75011132
|
|
|
| |
Triax to UG-1837 Cable
|
UG-1837 with Tx and Rx impedance-matched cable pair to a Triax sub-miniature cable plug (Trompeter PL155-32). Pairs with CV-MCU2 CDI cable (P/N 75011138) to route unbalanced signals through a patch panel. 20kA lightning protection for CDI interface included. Eight foot length. Also available in 10 or 15 foot lengths.
|
P/N 75011139 |
|
|
|
|
|
|
| |
CV-MCU2 Base Interface Panel
Assembly - 2 Port
 |
The CV-MCU2 Base Interface Panel offers full conversion of COTS
interfaces to tactical interfaces for 2 converter ports plus connection for external clock and configuration ports. Includes UG-1837 and push-pin connectors. Fiber interface is specified by part number when ordering
(see right column). 20kA lightning protection for CDI unbalanced interface (10kA for balanced interface) is also included.
 CV-MCU2 Connectorized Panel Assembly Datasheet
|
TFOCA:
P/N 97670018
TFOCA-II:
P/N 97670019
Expanded Beam Multimode:
P/N 97670020
Expanded Beam Singlemode:
P/N 97670021
|
|
|
|
| |
CV-MCU2 Expansion Interface Panel Assembly - 3 port
|
The CV-MCU2 Expansion Interface
Panel offers full conversion of COTS interfaces to tactical interfaces for 3 converter ports. Connections for
external clock and configuration ports are not supported. Includes UG-1837 and push-pin connectors. Fiber interface is specified by part number when ordering
(see right column). 20kA lightning protection for CDI unbalanced interface (10kA for balanced interface) is also included.
CV-MCU2 Connectorized Panel Assembly Datasheet
|
TFOCA:
P/N 97670022
TFOCA-II:
P/N 97670023
Expanded Beam Multimode:
P/N 97670024
Expanded Beam Singlemode:
P/N 97670025 |
|
|
|
|
| |
|
Blank Panel Cover used to cover an unused module slot in a CV-MCU2 chassis. Can also be used to cover unused module slots in the VersaMux 4000.
|
P/N 62023663 |
|
|
|
